BOSSCHUCK's listings

Thin-Walled Chuck Application Reference In machining thin-walled parts is sensitive to all kinds of influence factors, prone to deformation, it is difficult to meet the precision requirement, the serious influence product quality, thus to chuck requirement is very high.

An Automatic Clamping Expert Six Jaw Floating Centrifugal Force Compensating Chuck Application Reference Six claw centrifugal force compensation. Brake disc - tightening inner diameter, workpiece end face positioning: Applied to the first order. Processing outside diameter, end face. Brush card replacement quick and simple way. Has compensation function 6 fe...

An Automatic Clamping Expert Pump Shell Chuck Application Reference All kinds of pump body parts due to different functions, shape structure difference is bigger, the processing with chuck demand is also very high. BOSSCHUCK ® can be a very good application in the pump shell processing.

An Automatic Clamping Expert Cone Axis Chuck Application Reference Chuck cone axis machining sequence from the inside out, from coarse to fine, be determined by the principle of near to far, in a clamping work out more surface as much as possible.

An Automatic Clamping Expert Bearing Ring Chuck Application Reference Artifacts wall thin, easy to deformation, high machining accuracy requirements. Chuck dovetail groove design, six claw clamping force uniform, effectively reduce the workpiece deformation caused by clamping after processing.

An Automatic Clamping Expert Bearing Parts Chuck Application Reference Bearing parts application cases. The characteristics of the bearing components is the casting surface, thin wall and high machining accuracy requirements.

An Automatic Clamping Expert Long Axis Chuck Application Reference Long axis chuck and workpiece diameter is mainly used for processing car steps, as well as the outer contour of workpiece. In this reference, you can see the dashed part in workpiece card claws. This is the original raw workpiece diameter, when other heavy cutting workpiece machine parts, jaw...

An Automatic Clamping Expert The Camshaft Chuck Application Reference CAM shaft rigidity, easy deformation, high precision requirements for chuck, processing is difficult. Camshaft chuck must ensure the accuracy of the shaft neck size and the alignment between the journal.

An Automatic Clamping Expert The Output Shaft Chuck Application Reference In this reference, the dotted line machining process as a whole. You can also notice at the same time, when the jaw retraction, workpiece machining rotary blade driven by the driver. The processing content ： Surfacing, the diameter of axle Workpiece outer contour

An Automatic Clamping Expert Chuck Application Reference Of The Crankshaft Chuck built-in hydraulic cylinder, piston driven diaphragm loosen the workpiece design, diaphragm elastic clamping workpiece clamping attribute itself. Effective after fixed jaw clamping workpiece caused by the loss.

An Automatic Clamping Expert Eccentric Roller Chuck Application Reference Eccentric rollers are generally on a lathe processing, eccentric roller chuck in terms of the clamping requirement is very high, need to found the processing and the axis of the part and the lathe spindle rotation axis coincidence.

An Automatic Clamping Expert Slide Fork Shaft Chuck Application Reference Special, workpiece clamping required clamping difficult. Chuck claw design, 2 pull function after jaw parts close to surface. Gas detection is designed, applied in the automatic production line.