Woodpecker LED D Curing Light Unit

The Woodpecker LED D Curing Light Unit is specifically designed for dental applications. It utilizes the principle of ray radiation to rapidly solidify the light-sensitive resin, providing accelerated dental restoration and material solidification for dental whitening procedures. With its advanced technology and functionality, LED D Curing Light is a valuable tool in modern dentistry. The LED D Curing Light consists of a high-power LED, an optical fiber, and a main unit. It incorporates a digital screen, a time button, and various components to ensure efficient and precise operation during dental procedures.

The primary function of LED D Curing Light is to emit high-power blue light, generated by a 3W LED light source, which delivers wavelengths ranging from 420nm to 480nm. This specific wavelength range is ideal for dental applications, enabling effective curing and solidification of dental materials. While using LED D Curing Light, it is essential to adhere to certain precautions. Direct eye exposure to the blue light should be avoided, and the light should be aimed straight at the composite resin for optimal solidification. LED D Curing Light offers multiple operating modes, including full power, ramping mode, and pulse mode, which can be selected using the mode button. The solidification time can be adjusted using the time button, with options ranging from 5 to 40 seconds. The power button controls the emission of blue light, allowing for precise control during dental procedures.The optical fiber should be sterilized before each use, while other parts can be cleaned using clean water or neutral sterilized liquid. The curing light is equipped with an over-heat protection system, allowing for continuous operation within specified time limits.

features:

Wireless
Three working modes:- Full, Ramping, Pulse.
Time setting:- 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.
A full charge can be used for over 400 times. (10s/time)
Constant light intensity, the solidification effect is not affected by the consumption of remaining power.
With wire or wireless. It can run directly on commercial power supply if the battery runs out.
Key specification:

Rechargeable Lithium battery: ICR18490, 3.7V, 1400mAh
Adapter: Input – AC100V-240V 50Hz/60Hz, Output – DC5.0V/1A
Wavelength: 420nm-480nm
Light intensity: 1000mW/cm²~1700mW/cm²
Environment temperature: +5°C~+40°C
Relative humidity: 30%~75%
Atmosphere pressure: 70kPa to 106kPa
packaging:

1 x curing light unit
1 x stand
1 x light protector
1 x charger
1 x optic probe
1 x instruction manual