cat6a solid 100% pure copper cmp utp plenum cable fluke analyzed flexible

NCABLES – Cat6-A plenum 100% Pure Copper 500ft UTP Solid 8 Conductors bare ends 750MHz 23 AWG Unshielded twisted pairs Ethernet Networking bulk Cable
This Cat6A plenum copper cable is suitable for 10-Gigabit Ethernet speed up to 330 Feet. This cable is used in network application such as 10Base-T, `00Base-T, 1000Base-T and 10,000Base-T Ethernet. We designed this cable specifically for 10 Gigabit Ethernet applications over copper, and this one is pure solid copper cable. It is 750 MHz cable and support Power Over Ethernet (PoE) PoE+ and PoE++ (IEEE 802.3af/at/bt) up to 60W and 300V DC. Spline is included to reduce next end crosstalk. CAT6A has more and tighter twists, with more insulation to minimize crosstalk.
Easily bend where you need to move the cable in raceways and duct wiring. This cable will provide you your dream results speed performance over standard Cat6 cables. This cable manufactured in 500 feet single length for RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568.2-10 standard by American National Standard Institute / Telephone Industry Association and Electronics Industry Association. You can utilize with backward cat5e and cat6 compatibility.
Plenum Rated Teflon Jacket
This special Augmented Cat6 cable is made by Teflon material for your business and investment life time safety. Teflon material is only used for where Fire safety required and Low smoke environment. When Teflon used to design wires and cables market called it for Plenum Spaces. Plenum spaces installations need more reliable cables and wires. More tight twist.
Performance and Speed
Augmented Cat6 Plenum copper cable has speed to support up to 10GBps specifications, Used with 10BASE-T and 100BASE-TX or faster Ethernet as well. 10Gbps at the maximum bandwidth of 750 mhz. VoIP, CCTV and data networks.
Wide Range of Compatibility
Our Augmented (Cat6-A) plenum copper cable is best for Network adapters, Switches, Routers, ADSL/VDSL Modems and hubs. wireless networks with 802.11ac access points, Future standard 802.11ax will support speeds, up to 10 Gb/s. Power over Ethernet (PoE), 10GBASE-T Networks, HDBaseT Networks, Data Centers, Wireless Access Points, Power over Ethernet, IT/AV and HDBaseT™

Installations
Routing and Handling, Routing and Handling, Pathways and Spaces, Telecommunications Rooms, In-Wall Applications, Drop Ceiling Applications, Junction Boxes and Mud Rings, Surface-Mount Boxes

• YOU NEED 10 GB connections in a very electronically noisy environment and crosstalk (signal leakage between twisted pairs) is a concern.
• YOU NEED 10 GB CONNECTIONS between devices that are between 55 and 100 meters apart.
• YOU’RE INSTALLING IN NEW CABLING, don’t need 10 Gb right now, but don’t want to have to rip out you’re cabling and rerun it in 5 years. This is especially important when you’re running through walls, between floors, etc.
• YOU WANT INTERCONNECTS between devices (switches, routers, etc.) that support 10 Gb and would prefer to use Ethernet cabling instead of fiber.
• Sometimes you see a slight, and I do mean slight performance increase from using Cat6a cables over Cat6, but usually not enough to get excited about. It depends on you service provider speed.